7 ft Closet Door Installation in Ottawa

A 7 ft closet door is a practical step up from the standard 80 inch height. The extra inches open up the closet so you can reach the top shelf without a header crowding the space, while keeping the doors light enough to swing easily and stay perfectly aligned. This Ottawa reach-in closet was finished with white shaker-panel doors, black bar pulls and black hinges over warm wood flooring, giving a clean, modern look that suits both new builds and renovations.

Even at 7 ft, closet doors only look right when the details are correct. The two leaves have to meet evenly in the middle, sit flush against the stop and close without rubbing the floor or catching at the top. A frame that is slightly racked will leave a wedge-shaped gap that is impossible to hide, and hinges that are not aligned will let one door sit proud of the other. Those small faults are exactly what makes a closet feel cheap, even when the doors and hardware themselves are good quality.

For this installation we set the opening square and level first, then hung the slabs so the centre reveal stayed tight and consistent from top to bottom. The black hardware was positioned so the pulls line up and the doors latch lightly against the frame. The bottom clearance was set to clear the finished floor cleanly, so the doors glide open and shut without dragging and without leaving an unsightly gap underneath.

We install and service every common closet door style across Ottawa and the Ottawa Valley — hinged panel doors like these, bifold doors, bypass sliding doors and flush modern slabs. For a reach-in closet, hinged or bifold doors give you full access to the shelf and rod, while sliders save swing space in tighter rooms. We can help you pick the configuration that fits the opening, then measure, supply and install it so the result looks built-in rather than bolted on.

This project connects with our main door installation Ottawa service and our closet and bifold door repair page. If your current closet doors jump the track, fold unevenly or sag at the hinge, repair is often quicker and cheaper than replacement — see our hinge and hardware repair service. And if you are updating several rooms at once, we can match the hardware finish across every closet and interior door for a consistent look throughout the home.

The finished closet here opens smoothly, closes flush and looks sharp against the wood floor — exactly the standard we hold on every closet door installation in Ottawa.

Ottawa homes also add their own challenges to closet door work. Seasonal humidity swings can cause slabs to swell and shrink slightly through the year, so we set clearances that stay comfortable in both winter and summer rather than tuning a door tight on the day of install. Where new flooring, transition strips or thicker underlay have changed the height of the opening, we account for the finished floor — not the subfloor — so the doors never drag once everything is in place. These are the details that decide whether closet doors still feel right a year later.

Every closet door installation is backed by the same flat-rate pricing and workmanship guarantee as the rest of our work. We arrive with the tools to hang, shim and adjust on the spot, clean up the opening, and test each door through its full swing before we leave. If anything shifts during the first weeks of use, a quick hinge or strike adjustment brings it straight back to smooth, quiet operation.

Problems We Solved

• Bi-fold and sliding closet doors jumping their track
• Panels rubbing, sticking or hanging out of square
• Worn pivots and guides that would not stay aligned

The Result

• Closet doors hung plumb and gliding on their track
• Pivots, rollers and guides set for smooth, quiet operation
• A clean, square finish that matches the room